; "7R2Prism 7R2Prism", 16 DMX Channels, filename: 7R2Prism.R20 ; ; Create by CODE_R20_Editor Ver: 1.6.29 2018/3/10 18:07:07 ; ;---------------------------------------------------------------------------- ; The device name, upto 11 characters, no spaces are allowed DEVICE 7R2Prism 16 DMX Channels NAME "7R2Prism" "7R2Prism" ; ;---------------------------------------------------------------------------- ; The Type of instrument, 1 & M must required for backward compatibility ; The middle number denotes the number of DMX channels used TYPE 1 16 M ; ;---------------------------------------------------------------------------- ; Mirror/Head resolution MIRROR 2 0 0 ; | | | ; | | |_______ maximum tilt movement (in degrees) ; | |____________ maximum pan movement (in degrees) ; |_________________ 1 means moving mirror, 2 means moving head ; ;---------------------------------------------------------------------------- ; Patching Information. (Upto 10 lines allowed) ; Upto 10 lines of 159 chars are allowed including formulae ; Variables used d=dmx number(1..512), h=handle(1..60), n=devicename (11-char) ; Allowed modifiers ; +,-,*,/,(,) basic arithmetic ; % means remainder after divide ; & means logical AND ; | means logical OR ; R means reverse the bits of the current result (operates on a byte) ; ^ means logical Exclusive OR (operates on a byte) ; > means shift to the right ; < shift to the left ; r followed by number means get the value of that parameter ; d DMX address ; n Fixture name, a 0 terminated character string ; h The handle number DEVICEADDRESS "" "" "" "" DAEND ; ;---------------------------------------------------------------------------- ; Specify DMX limits ; ; minimum allowed dmx number MINDMX=1 ; ; maximum allowed dmx number MAXDMX=497 ; ; DMX number must be divisible by this DIVBY=1 ; ;---------------------------------------------------------------------------- ; DMX channel description ; ; Column by column description of each DMX channel ; 1. The channels bank number (1..12) ; 2. The upper faders in the bank (1) or the lower faders in the bank (61) ; 3. Channel type (L=LTP, H=HTP, I=Instant LTP, S=16-bit instant LTP, ; s=16-bit Fadeable LTP ; 4. DMX offset (1..number of DMX channels) ; 5. The output level is proportionally recdced by this level (0..100%) ; 6. The curve number (applicable only to HTP channels), usually set to 1 ; 7. Inverted (I) or Normal (N) ; 8. Attribute type (A=Color Wheel1, B=Cyan, C=Magenta, D=Yellow, ; E=Pan, F=Tilt, G=Iris, H=Dimmer, I=Gobo1, J=Gobo2, K=Gobo1_Rotate, ; L=Focus, M=Gobo2_Rotate, N=Color Wheel2, O=Shutter, P=Prism, Q=Zoom, ; R=Effect_Rotate, S=Frost, T=Red, U=Green, V=Blue, 0=uncategorised) ; 9. Checksum channel (Always 1) ;10. Attribute name, must be enclosed in quotes and upto 12 charcaters allowed ;11. The ON value of this channel (0..255) ;12. The Highlight level of this channel ;13. The Lowlight level of this channel ; DMX 3 61 s 1 100 1N E 1 "Pan" 128 -1 -1 0 0 L 2 100 1N E 1 "Pan fine" 128 -1 -1 3 1 s 3 100 1N F 1 "Tilt" 128 -1 -1 0 0 L 4 100 1N F 1 "Tilt fine" 128 -1 -1 8 1 L 5 100 1N 0 1 "XYSpeed " 0 -1 -1 1 1 H 6 100 1N H 1 "Dimmer" 255 255 0 2 61 L 7 100 1N O 1 "Shutter" 255 255 0 5 61 L 8 100 1N S 1 "Frost" 0 -1 -1 4 1 I 9 100 1N A 1 "Col.Wheel1" 0 -1 -1 6 1 I 10 100 1N I 1 "Gobo 1" 0 -1 -1 9 1 L 11 100 1N P 1 "Prism1" 0 -1 -1 9 61 L 12 100 1N C 1 "Prism2" -1 -1 -1 10 1 L 13 100 1N B 1 "Prism rot" -1 -1 -1 5 1 L 14 100 1N Q 1 "Zoom" 128 -1 -1 7 1 L 15 100 1N 0 1 "lamp" 0 -1 -1 7 61 I 16 100 1N J 1 "Roset" 0 -1 -1 END ; ;---------------------------------------------------------------------------- TEXT END ATTR END ; ;---------------------------------------------------------------------------- ; Macros MACRO "Lamp on" 1 15 "data" 0 C8 "delay" 1 32 "data" 0 CD MEND MACRO "Lamp off" 2 15 "data" 0 64 "delay" 1 32 "data" 0 69 MEND MACRO "Roset" 3 16 "data" 0 FA "delay" 1 28 "data" 0 FF MEND